Canada Rubber Liquid Rubber – 5 kg

47.84 € excl. VAT | 58.84 € incl. VAT (23%)

8 in stock

Canada Rubber S 700 liquid rubber — 5 kg.
Type: waterproofing coating.
Application: normally one coat; on severely degraded substrates, apply an additional coat after the first has dried and a minimum interval of 24 hours, depending on weather conditions.
The S 700 technical data sheet gives indicative consumption for the treated surface: roofing felt 1.5–2 kg/m², sheet metal 1.0–1.2 kg/m² and concrete 1.8–2.5 kg/m². These are substrate-specific values, not a universal rate for each coat.

Details

ASPanel — quote in a second, call +48 500 306 305

S 700 liquid rubber is a polymer-modified elastomeric bitumen emulsion for protecting bituminous, metal, concrete and wooden surfaces. The manufacturer describes elongation of up to 900%. Once dry, it forms a seamless, flexible membrane that accommodates movement in the substrate.

APPLICATIONS:

• waterproofing roofs;

• waterproofing balconies and terraces;

• waterproofing beneath tiles in wet rooms, including bathrooms, kitchens and utility rooms;

• waterproofing existing bituminous coatings, roofing felt and sheet-metal roofs;

• protecting polyurethane foam insulation;

• corrosion protection for metal structures.

Features of S 700 / N 500 liquid rubber waterproofing:

  • Cold application.
  • Suitable for renovation of existing roofing, subject to the manufacturer’s substrate preparation instructions.
  • Elongation up to 900% with shape recovery.
  • A seamless finish.
  • A flexible membrane designed to accommodate substrate movement.
  • Adhesion to a range of substrates.
  • Waterproofing of horizontal and vertical surfaces.
  • Resistance to frost, ageing and UV exposure, as described by the manufacturer.
  • A water-based formulation; consult the current product and safety documentation before use.

The product’s thick consistency helps it fill gaps and reach difficult areas. It can be applied to vertical surfaces and used either across a whole surface or for a local repair where the leak has been identified.

For manual application, use a roller or brush and apply the quantity specified for the substrate and waterproofing system. At cracks and junctions between vertical and horizontal surfaces, embed geotextile reinforcement in the first coat. Press the reinforcement into the wet material, saturate it and cover it with more S 700. The S 700 technical data sheet, revised on 22 June 2026, specifies normally one coat; on severely degraded substrates, apply an additional coat after the first has dried and a minimum interval of 24 hours, depending on weather conditions. The S 700 technical data sheet gives indicative consumption for the treated surface: roofing felt 1.5–2 kg/m², sheet metal 1.0–1.2 kg/m² and concrete 1.8–2.5 kg/m². These are substrate-specific values, not a universal rate for each coat.

Contact us

Reviews

Reviews translated from Polish; they describe customers’ experiences in Poland.

8 in stock