termPIR® AL GK 30 mm

Product name:

termPIR® AL GK PIR Insulation Board 30 mm + 12.5 mm Gypsum Plasterboard

termPIR® AL GK 30 mm – effective thermal insulation and interior finishing

The termPIR® AL GK 30 mm insulation board is a modern solution combining the high thermal insulation performance of a PIR core with a factory-bonded 12.5 mm gypsum plasterboard. The product is primarily designed for thermal insulation from the inside of buildings.

The use of rigid PIR (polyisocyanurate) foam provides very good thermal performance with a relatively thin insulation layer. This makes the board particularly suitable where it is important to reduce heat loss without significantly reducing usable interior space.

Combining PIR insulation with gypsum plasterboard makes it possible to create both a thermal insulation layer and a surface ready for further interior finishing, helping to simplify and speed up installation work inside the building.

termPIR® AL GK 30 mm – PIR + gypsum plasterboard

The termPIR® AL GK board features a rigid PIR foam core with a gas-tight multilayer facing based on paper and aluminium. A 12.5 mm gypsum plasterboard is factory-bonded to the PIR insulation layer.

This solution combines effective thermal insulation with an interior finishing layer in a single product, making it particularly practical for renovation, refurbishment and internal insulation of existing buildings.

Key parameters of the termPIR® AL GK 30 mm board:

• PIR layer thickness: 30 mm,
• gypsum plasterboard: 12.5 mm,
• core: rigid PIR foam,
• PIR facing: gas-tight multilayer facing based on paper and aluminium,
• thermal conductivity λD: 0.022 W/(m·K),
• thermal resistance RD: 1.35 m²K/W,
• board dimensions: 1200 × 2600 mm,
• board area: 3.12 m²,
• edge finish: FIT – straight edge.

Thanks to its low thermal conductivity of λD = 0.022 W/(m·K), the 30 mm PIR layer provides effective thermal insulation while maintaining a relatively slim construction. This is particularly beneficial in rooms where preserving as much usable floor space as possible is important.

Applications of termPIR® AL GK 30 mm

termPIR® AL GK boards can be used for:

• internal wall insulation,
• insulation of pitched roofs and attics,
• under-rafter and between-rafter insulation systems,
• thermal renovation and modernisation of existing buildings.

The combination of PIR insulation and gypsum plasterboard makes the product a practical solution wherever it is important to improve the thermal performance of a building element while efficiently preparing the interior surface for further finishing work.

termPIR® AL GK – availability at ASPanel

ASPanel offers termPIR® AL GK boards in a range of thicknesses, allowing you to select the right thermal insulation solution for the specific requirements of your project and the available installation space.

termPIR® AL GK boards are available from our 4 ASPanel branches: Miszewko / Elbląg / Słupsk / Szczecin.

CALL or MESSAGE US – we will help you choose the right termPIR® AL GK board thickness for your project and check current availability at your preferred branch!